10 ft Safety Net - 2m high ( for 4 Curved Pole trampoline )

JumpArt 10 ft Safety Net, 2 meter high  ( suitable 4 Curved Pole trampoline )

Net height is 2m suiting trampolines that have a taller pole structure than our 1.8m version of this netting

The Inside model is designed to increase safety by its significant distance from the poles.

This net secures to the bottom of your trampoline jump mat with a soft rope, this is knotted at one side of the trampoline netting opening to a jump mat eyelet, then it is weaved through a series of holes at the bottom of the netting and through each eyelet on the jump mat, then pulled taught and knotted to the last eyelet on the other side of the netting opening.

This netting will fit trampolines that use a top rod system, plastic or steel to a maximum width of 28mm.

NOTE this will not fit the top ring poles of a JumpPower if the protective foams are still on it.

If wanted to use this for a JumpPower it would only work if top ring steel poles had protective foam removed, the top sleeve is not wide enough to take the foams also (please see additional photos to demonstrate this). Also note that the JumpPower netting is machine sewn to the jump mat so would need to be cut away from that and then it can be attached to the jump mat with the soft rope included (video below to demonstrate this).  However, please only use for JumpPower if are ok with this protective foam being removed.